Client: Canton Township F.D. Refurb Engine
Year Completed: 2017
Canton Twp. Fire Department, Canton, Ohio. This is the 3rd apparatus Sensible Products has outfitted for this department. On this refurbished engine, the F.D. wanted to clean it up and organize the equipment to match the other two apparatus as best we could. Working off pictures from the prior apparatus, we matched the equipment mounting as best we could. In the first drivers side compartment, a current out/down slide out was removed and one fixed aluminum shelf was added in a lower location. Chanl Panl boards were added on rear and side walls of the upper portion of this compartment and all water flow equipment was mounted. Nozzles and a wye were mounted on the shelf. The location of the water flow equipment was to match the previous engine. In the lower portion of this compartment, a black poly floor board with plastic welded dividers was added to separate and hold foam and a hose roll. In the second drivers side compartment, the hotel pack was secured on an out/down unit and brackets were mounted to hold extra bottles. In the third drivers side compartment, Chanl Panl rear and side wall boards were added to hold cord adapters. A plastic welded divider was made to hold three extinguishers, secured with a strap, on the shelf of this compartment. Down below, two fans were secured with a strap. In the third passengers side compartment, two existing tool boards with mounts were cleaned up and remounted on poly boards on both sides of the vertical slide out. Some existing mounts were reused to mount a halligan, pick head axe, 2 sledge hammers, bolt cutters, and a fan hanger bar. On the three shelves, Turtle Tile was added a chain saw, rotary saw, sawzall, generator, and fuel cans were mounted. A pocket was added for saw parts and a mounting post for extra saw blades. In the second passengers side compartment, a Chanl Panl floor board was mounted to create an adjustable divider system. Black plastic dividers secured into the slots of the Chanl Panl made for an adjustable divider system to hold various RIT and rope bags. With different bag sizes, the dividers can be moved farther apart or closer together depending on spacing needed. In the first passengers side compartment, a fixed aluminum shelf was added and a plastic welded divider floor board was added for hose rolls. In the cab, two Chanl Panl boards were added on each side to mount two New York hooks, claw tool, axe, irons, and two Streamlights. A plastic divider was mounted in the dog house area and the TIC secured with clips. Three custom made cargo nets by Sensible Products were mounted over the EMS supplies area in the cab to replace existing nets they did not like. All equipment was labeled with red/white tags. This truck was completed in 5 days.
- Match your equipment to our mounting products listed in our catalog. Custom mounts are available upon request. We will ship all mounting products complete along with mounting hardware. This will allow you to plan, layout, and mount all equipment at your facility.
- Contact us for help designing boards or configuring cabinets based on your equipment list. We will ship complete boards to you, ready for installation.
- Send us your apparatus and accompanying equipment and we will do all the layout, fabrication, and installation. Your apparatus will be completely outfitted and ready to Go In Service when it leaves our facility! Contact us for outfitting large fleets as well.